By Smart Builder 360 Team | Principal Contributors: Kurt Shank & Dave Daugherty | Updated: November 19, 2026
This is general information, not financial or legal advice. Every lender sets its own terms and draw rules, and the programs below change. Get the details from the lender in writing, and have an Ohio attorney review anything about liens or your contract.
A construction loan is a short-term loan that pays for building or remodeling as the work gets done. The lender approves a total amount up front, then releases it in draws tied to stages of the job. After the house is finished, the loan is paid off or turns into a regular long-term mortgage.
For a builder, the key difference from a cash job is who controls the money. On a cash remodel, your client pays you on your construction payment schedule. On a loan job, the lender holds the funds and releases each draw after an inspection and paperwork. As Fannie Mae's guide says of one-closing loans, the lender "will be responsible for managing the disbursement of the loan proceeds to the builder, contractor, or other authorized suppliers." You send a draw request at each stage, and the lender decides when to pay.
Most new-home loans come in two shapes. A one-time close (construction-to-permanent) loan covers the build and the long-term mortgage with one set of papers. A two-time close uses one loan for the build and a second closing for the mortgage. A construction-only loan covers just the build and must be paid off at the end.
| Loan type | How it closes | What it means for the builder |
|---|---|---|
| One-time close (construction-to-permanent) | One closing. The loan converts to a permanent mortgage when the house is done. | One lender runs the draws start to finish. Fannie Mae caps any single construction period at 12 months and the total at 18 months for loans it later buys. |
| Two-time close | Two closings with two sets of legal documents: the construction loan, then the permanent mortgage. | The permanent lender can be a different lender. Fannie Mae's 12- and 18-month limits don't apply. |
| Construction-only | One short-term loan for the build. The borrower pays it off or refinances at the end. | Same draws for you. Your client must qualify for a mortgage later. |
Fannie Mae doesn't buy construction loans themselves. It buys the permanent mortgage once the house is finished, and only after all work that could support a mechanics lien is "completed and paid for" and every lien or claim is satisfied. That's why lenders watch lien paperwork on every draw.
FHA's 203(k) and Fannie Mae's HomeStyle Renovation loans let a buyer or owner roll repair and remodel costs into one mortgage. The money sits in an escrow account and gets paid out in draws, usually after an inspection, so a remodeler on one of these jobs deals with the lender much like a new-home builder does.
When you build a spec house, you're the borrower. Each bank sets its own rules for spec loans, so expect it to look hard at your track record and finances. Owner-builder loans, where a homeowner acts as their own general contractor, are harder to get, because the lender loses the experienced builder it counts on to finish.
Many lenders won't do it, or want proof of building experience first. The renovation programs show the caution. HomeStyle's "Do It Yourself" option is limited to one-unit homes and to work worth no more than 10% of the "as completed" value, and the lender inspects every item over $5,000. Under 203(k), owners doing their own work can't be reimbursed for their labor. If an owner-builder hires you for part of the job, get clear on who signs the draw requests.
Before a loan closes, the lender usually reviews the builder as well as the borrower. Expect to hand over a signed contract, plans and specifications, a line-item budget, a proposed draw schedule, proof of insurance and your business details. A complete package up front avoids a slow first draw.
Each draw follows the same loop. You finish a stage and request the money. The lender sends an inspector to confirm the work, updates title to check for new liens, collects your affidavit and lien releases, and then pays. Many loans also hold back part of each draw until the end, much like retainage.
This is an example, not a lender's schedule. Your lender sets the real stages, amounts and paperwork. Use it to see how draws line up with the job, then build yours with our draw schedule lesson.
| Stage | What usually triggers the draw |
|---|---|
| Deposit or lot | At or after closing, when the lender allows it: the lot payoff if the loan covers it, or your contract deposit. |
| Foundation | Footers, foundation walls and backfill done, and the foundation inspection passed. |
| Framing | House framed and under roof, with windows and exterior doors in. |
| Rough-ins | Plumbing, electrical and HVAC roughed in, and rough inspections passed. |
| Drywall | Insulation in and inspected, drywall hung and finished. |
| Trim | Cabinets, trim, interior doors, counters and flooring in. |
| Final, with holdback | House finished and the occupancy certificate issued. The holdback comes after the lender's final conditions are met. |
See the full bank draw process for home builders.
Getting the paperwork ready for each draw? Smart Builder 360 builds a draw form from your project's schedule and cost categories and keeps the lien waiver details with it. Try it free for 30 days, no credit card.
This is general information, not legal advice. These sections have details and exceptions not covered here. Ask an Ohio construction attorney how they apply to your job.
Two parts of Ohio's lien law, Revised Code chapter 1311, shape how lenders pay draws. Section 1311.011 sets rules for building or remodeling an owner's own home, including a contractor's affidavit before every lender payment. Section 1311.14 gives a construction lender priority over later liens if it pays out the loan the way the law lays out.
A "home construction contract" is a contract with an owner to build or improve a one- or two-family home they live in or plan to live in. On those jobs:
On other jobs, such as a rental, the owner's notice of commencement must name the lenders, and a mortgage holder may record it if the owner doesn't. See our guide to Ohio lien releases and bank draws.
Most construction loans set a window to finish, and the borrower usually pays interest during the build instead of full mortgage payments. On many loans, interest runs only on the money drawn so far. Program deadlines run from 9 months for a Limited 203(k) to 18 months total for a one-time close Fannie Mae will buy.
| Loan | Time to finish the work |
|---|---|
| One-time close (Fannie Mae) | No single construction period over 12 months, 18 months total with extensions |
| FHA Standard 203(k) | Up to 12 months |
| FHA Limited 203(k) | Up to 9 months |
| Fannie Mae HomeStyle Renovation | 15 months from closing |
Federal disclosure rules (the CFPB's Regulation Z) cover two ways construction loan interest is charged: only on the amount actually advanced, or on the whole loan amount no matter what's drawn. They also cover interest-only payments during construction. Either way, a slow draw costs money: you wait for pay, and your client's interest keeps running.
Most draw delays come from paperwork, not the bank. A missing lien release, a percent complete that doesn't match what the inspector sees, an unapproved change order or a new lien on title can each hold up a draw. Send complete, accurate requests and line up releases before you ask.
| What slows the draw | How to head it off |
|---|---|
| Missing affidavit or lien releases | Collect releases as you pay subs, not the day the draw is due. List any unpaid claims on your affidavit. |
| Percent complete doesn't match the site | Bill what the inspector can see. Walk the job before you request. |
| Change orders the lender hasn't seen | Get every change order signed and send it to the lender. On HomeStyle, the loan amount can't grow to cover overruns. |
| A lien or claim shows up on title | Settle or bond disputed amounts quickly. The lender will hold the disputed sum. |
| Budget out of balance | Keep the cost breakdown current so the lender sees the money left will finish the job. |
See also how long a construction draw takes.
In Ohio, construction loans mostly come from banks, credit unions and mortgage lenders, and local and community banks are a common first stop. Each lender sets its own draw rules. The Ohio Housing Finance Agency's homebuyer program offers 30-year fixed-rate mortgages through approved lenders, and its pages don't list a construction loan.
To check a lender, the Ohio Department of Commerce's Division of Financial Institutions has search tools for state-chartered banks and credit unions, and links to NMLS Consumer Access for non-bank mortgage lenders. 203(k) and HomeStyle loans come from lenders that offer those programs.
The best question to ask any lender: "Can I see your draw rules and forms before we close?"
Smart Builder 360 doesn't lend money or fill in a bank's own draw form. When a draw is due, you type in the milestone, the requested amount and the percent complete, and the app makes its own bank draw form from the project's record, schedule and cost categories. Supporting documents and lien waiver details stay with that draw.
On a 203(k) or HomeStyle remodel, the lender still uses its own draw forms. Smart Builder 360 keeps the numbers behind them: what's been drawn and the approved change orders. That matters because a HomeStyle loan can't grow to cover overruns, and a 203(k) has only its contingency reserve. Our step-by-step guide shows how to create your first bank draw request.
The project statement keeps a running record of what's been paid, received and drawn, and approved change orders keep the contract price clear. It's built by builders for builders and endorsed by The Ohio Home Builders Association (OHBA).
Try Smart Builder 360 free for 30 days.
For new homes and 203(k) or HomeStyle remodels: bank draw forms, project statements and approved change orders, with each draw's documents and lien waiver details in one place. No credit card required.
Start my free trialYes. Many lenders offer one-time close construction-to-permanent loans, which turn into a regular mortgage when the house is done. If the lender plans to sell the loan to Fannie Mae, no single construction period can be over 12 months and the total can't pass 18 months.
The builder finishes a stage and sends a draw request. The lender inspects the work. Then the lender, or often a title agency working for it, updates title to check for new liens, collects the builder's affidavit (sworn statement) and lien releases, and releases the money. An FHA 203(k) holds back 10% of each draw; on other loans, the loan agreement sets the holdback.
On a home construction contract, yes. Ohio Revised Code section 1311.011 says a lending institution can't pay the original contractor until the contractor gives an affidavit that everyone who worked or supplied materials has been paid, or lists each unpaid claim. Most lenders also ask for lien releases.
Some lenders allow it, but many don't, or they want proof of building experience. Fannie Mae's HomeStyle caps do-it-yourself work at 10% of the as-completed value, and 203(k) doesn't reimburse owners for their own labor.
Yes. FHA's 203(k) and Fannie Mae's HomeStyle Renovation loans roll remodel costs into one mortgage and pay the contractor in draws, usually after inspections. A Limited 203(k) covers up to $75,000 of nonstructural work for case numbers from Nov 4, 2024, while Standard 203(k) and HomeStyle handle bigger jobs.
Ohio has no state license for general contractors, home builders or remodelers, so the lender can't ask for one from the state. Many cities and counties require a local registration or license before issuing permits, and lenders may ask for that.
Checked November 19, 2026. Some Ohio Revised Code and HUD pages were read from archived copies (web.archive.org), and Mortgagee Letter 2026-06 from a published copy of the full letter.
Our team of experts is ready to help around the clock.